Tag Archives: Event

Construction Tour: RISD ISB

11 Sep

Tour Flier -RISD ISB
Click HERE for poster

Wed, September 11, 5pm – 6pm

55 Canal Street
Providence RI (map)

Tour led by Katie vanHamel of Ed Wojcik, Architect. The Rhode Island School of Design Illustration Studies Building (ISB) is a 38,000 SF mercantile building on the Providence riverfront. The 6000 SF addition extends to the east into the parking lot, and will serve as the main circulation for the building.
This is an active construction site, please remember to bring your hardhat and to wear appropriate shoes!
$5 AIA members & students
$10 Non-members
Register HERE
1.0 CEU (non-HSW)
1 Hour IDP for CA


Construction Tour: The Providence G

26 Aug

Tour Banner -ProvidenceGCLICK HERE for poster

Wednesday, August 28, 2013 5:00 PM – 6:00 PM

100 Dorrance Street
Providence, Rhode Island 02903

Tour led by Eric Army, AIA of Studio Meja. This former Gas Company headquarters from 1924 is seeing new life as luxury apartments. The complex will house additional retail, office and restaurant spaces. The spaces are designed for maximum efficiency, with cove-lighting featured in most great rooms. Interesting finishes include walnut cabinets, granite countertops and bamboo flooring. Two units delicately preserve the Gas Company’s former President’s Office and Board room.

Please remember to bring your hardhat and to wear appropriate shoes!

$5 AIA members & students
$10 Non-members

Register HERE

1.0 CEU (non-HSW)
1 Hour IDP for CA

Young Professionals Networking Night

20 Aug


Greater Providence Chamber of Commerce and The Young Professionals Collaborative of Rhode Island Presents the 5th Annual Statewide Young Professionals Networking Night.

Join young professionals from across Rhode Island for a vibrant night of networking at this fifth annual event designed to help attendees develop new contacts and exchange ideas. The evening includes heavy hors d’oeuvres and a cash bar. Parking lot and complimentary valet parking are available. For more information visit the GPCC site here

Thursday, August 22
5:30 – 7:30 PM
Eleven Forty Nine
1149 Division St, Warwick

Tickets are $10 in advance and $15 at the door. Register HERE

ARE Review Notes: Structural Systems

8 Aug

Below are the highlights of Bob’s Structural Systems Exam Review session. I will be attaching the full notes as a pdf shortly.


STRUCTURAL SYSTEMS Review with Robert Dermody from Roger Williams University

AIA Space: August 7, 2013: 6pm


  • The architect’s studio companion, Edward Allen & Joseph Lane

  • Statics and Strength of Materials for Architecture and Building Construction, Barry Onouve & Kevin Kane

  • Elementary Structures for Architects and Builders, R.E. Shaeffer

  • ASD Steel construction manual 9th Edition

  • Structural Systems Reference Index

STUDY TIP:  FYI NCARB owns this exam, not Kaplan or PPI. Therefore take the review guides with a grain of salt. they are not written by the same group.

EXAM TIP: Answer ALL the questions, leave enough time to go back. Practice to be fast enough so that you can get through everything and leave enough time on the Q’s you don’t know

REVIEW: NCARB online  Structural Systems Exam guide HERE


4. LATERAL FORCES (ALL wind or seismic loads ARE lateral…FYI)

EXAM TIP: Figure out what the question is asking about – looking at the wording, to key you into what kind of loading – wind or seismic, they are asking about



  • Do the upper floor first, work top down

  • Practice these, and practice your methodology of how to tackle the vignette.

  • Keep it SIMPLE!!! Do not do anything fancy, just make sure it works.

  • Always start with columns in the corners – make sure it doesn’t go through anything on the floor below

  • Make the design efficient – aka, make things all the same widths – think real world ordering all the same size joists. Always maximize the spacing of your joists to be as efficient as possible. Deck is a one way system (directional because of fluting)

  • Repetition is REALLY good in structures. The more of the same, the easier it is to build.

  • Typically with joists – you want to span the shorter direction, because the joists can be less deep, therefore weigh less, therefore cost less. Structure is priced by weight.

  • Make sure the columns are on both plans, ie. they aren’t left mid-air, they continue to ground

  • If your joists have to be different lengths – keep things symmetrical, and make sure two of the three bays are the same

  • Sketch out on your scrap paper to remember the minutia

  • Drag the area for joists from the CENTERline of the column

  • Look for beam length, joist length, joist spacing information out of the written part


  • Be careful for the “except” questions. Make sure you are reading the question carefully

  • For number questions – if you get the number right off, great, if not, can guess by setting the answer numbers to the equation to see if they make any sense.

  • Mark the ones you want to check later

  • Study with friends to hash things out

  • You’re not going to get every question right, don’t worry about the ones you really don’t know.

  • Some truth to going with your gut; some of the questions are just logical.

2013-08-07 PhotoStay tuned for pdf notes!


ARE Seminar Series: Structural Systems

30 Jul

ARE Structural Systems

ARE Seminar Series: Structural Systems

Wednesday, August 7, 2013, 6:00pm

AIAri Windows: 158 Washington Street, Providence, RI

Register Here

Robert J. Dermody, AIA, NCARB, will present an overview of the Structural Systems Division of the ARE.  This division of the ARE incorporates both multiple-choice questions, and a structural layout vignette.  Content areas include: general structures, seismic forces, wind forces and lateral forces.  This session will review of general structural principles such as equilibrium, forces, structural systems, load paths, structural materials, and basic structural behavior.  Sample structural questions and problems will also be discussed and solved.

About our presenter…

Robert J. Dermody is an associate professor in the School of Architecture, Art and Historic Preservation at Roger Williams University in Bristol, RI.  Mr. Dermody has a Bachelors Degree in Civil Engineering from the University of Massachusetts at Amherst, and a Master of Architecture degree with a concentration in Structures from the University of Illinois at Urbana Champaign.

Mr. Dermody teaches both design studios and technical courses at the undergraduate level. Courses taught include: structural design, construction materials and methods, and design studios.  He is a founding member of the Building Technology Educators Society.

Mr. Dermody is a registered architect in Massachusetts.